• Real 100 w RMS power handling
• Sensitivity: 95dB @ 2.83v
• 1.5” (38.5.7mm) aluminium voice coil.
• Low weight due to the neodymium magnet system
Nominal diameter: 125 mm. 5 in.
Rated impedance: 4 ohms
Minimum impedance: 4 ohms
Power capacity*: 100 w RMS
Program power: 200 w
Sensitivity: 95 dB 2.83v @ 1m @ 2p
Frequency range: 90 - 9000 Hz
Recom. enclosure vol.: 10 / 20 l 0.35 / 0.7 ft.3
Voice coil diameter: 38.5 mm. 1.5 in.
Magnetic assembly weight: 1.2 kg. 2.64 lb.
BL factor: 8.1 N / A
Moving mass: 0.007 kg.
Voice coil length: 6 mm
Air gap height: 6 mm
X damage (peak to peak): 20 mm
Resonant frequency, fs: 138 Hz
D.C. Voice coil resistance, Re: 3.9 ohms
Mechanical Quality Factor, Qms: 5.76
Electrical Quality Factor, Qes: 0.41
Total Quality Factor, Qts: 0.38
Equivalent Air Volume to Cms, Vas: 1.68 l
Mechanical Compliance, Cms: 166 mm / N
Mechanical Resistance, Rms: 1.2 kg / s
Efficiency, ho (%): 1.05
Effective Surface Area, Sd (m2): 0.0085 m2
Maximum Displacement, Xmax***: 2 mm
Displacement Volume, Vd: 17 cm3
Voice Coil Inductance, Le @ 1 kHz: 0.2 mH
Overall diameter: 155 mm. 6.10 in.
Bolt circle diameter: 141.5 mm. 5.57 in.
Baffle cutout diameter: 120 mm. 4.72 in.
Depth: 73.5 mm. 2.89 in.
Volume displaced by driver: 0.5 l 0.019 ft.3
Net weight: 1.3 kg. 2.86 lb.
Shipping weight: 1.8 kg. 3.96 lb.
* The power capacity is determined according to AES2-1984 (r2003) standard. Program power is defined as the transducer’s ability to handle normal music program material.
** T-S parameters are measured after an exercise period using a preconditioning power test.
*** The Xmax is calculated as (Lvc - Hag)/2 + Hag/3.5, where Lvc is the voice coil length and Hag is the air gap height.